DATEUP 42U Server Networking Cabinet Price in bangladesh

DATEUP 42U 600x450mm Network /Server Rack Cabinet in Bangladesh

DATEUP MW.6409.9101, 42U 600×450mm Network /Server Rack Cabinet is the ideal solution for Switch Router and networking applications in IT environments. DATEUP 42U Network Enclosure Cabinet is packed with features designed to simplify rack equipment installations and rack equipment maintenance: top-panel cable routing ports, perforated Sides to promote efficient airflow, adjustable mounting rails, toolless PDU mounting and more. DATEUP network rack is compatible with extensive range of rackmount accessories, enabling you to customize your solution to meet your requirement. The 42U Network Rack is made for easy and wall mount installation.

Features of 42U 600x450mm Network /Server Rack Cabinet

oolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDU. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories.
Enclosure includes mounting hardware of 30 pieces of M6 cage nuts and 30 pieces of M6 screws
De-greasing, Pickling, phosphoric powder coated finish resists conditions found in non-IT environments such as warehouses.
Compact design allows the enclosure to roll through standard height commercial doorways
Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and rear doors include quick-release ground wires.
Top panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first Open bottom for cable access
Compatible with airflow optimization and cable management accessories
Mounting profiles with laser U-mark.
DATEUP safety lock
Removable side panels, easy installation.
Toughened glass front door with swing handle lock, perforated front door border
19” standard installation
Door turning angle of front door is over 180 degrees.
Cable entries in the top cover, bottom cover and back panel;
Wall mounted panel, convenience for installation, locked from inside with screw, avoiding to be stolen or accidentally dropped.

42U Server Rack Details

Specification of 42U Server Rack

<td > Available Sizes Capacity(U)

Item	Details
Brand	Dateup
Model	MW.6409.9101
Dimension	600 x 450 x 501mm (W x D x H )
Rack Type	Wall Mount Rack
Doors	Front Glass door with Lock Rear Steel door
Fans	02 units of Top Fan (Low Noise)
PDU	1 X 6-way UK Type Universal 10A PDU
Other Accessories	1 Set Wall mount Kit , M6 Cage Nuts Assembly & Earthing Grounding Kit.
Other Features	Full Vented Top Frame with Top / Bottom Cable Base Frame with Provision of Cable Entrance 2 Lift Off Type Side Door with Quick Release Catch & Cam Lock / Panel Mount with Unit Indication
Main material	SPCC cold rolled steel
Material Thickness	Mounting profile 2.0mm, mounting angle 1.5mm, others 1.2mm
Surface finish	De-greasing, Pickling, phosphoric, powder coated
Loading capacity	Static loading: 60KG
General Specification	Elegance look, profound technique, precise dimension with world class standard
	ANSI/EIA RS-310-D, IEC297-2, DIN41494; PART1, DIN41494; PART7, ETSI standard.
Degree of Protection	IP20
Color	Black
Certification:	ISO, UL, CE, RoHS, CPR, ETL
6U,42U,42U,42U,42U,42U,42U,42U

42U Server Rack Dimension

1) Frame

2) mounting Rail

3) Side Panel

4) Venter Door

5) Glass Door 1

6) Glass Door 2

7) Solid Steel Door

42U-rack-Diagram

Server Rack Sizes: Understanding the Differences

When building a server, deciding between a variety of mounting options can be intimidating. There are different sizes of server rack to fit all of the different ways that people use servers.

Understanding just a few variables will allow you to make an educated purchase in no time. As long as you know the depth, height and width that your server and accessories require, you can end up with a purchase that you won’t need to return. Secondary factors like thermal requirements and security are good to think about in advanced, but can be manipulated more than the rack itself.

Server Rack Height

Server rack height is one of the more popular ways to classify a server. People often label their rack by its specific height, such as “42U server racks”. The “U” in “42U” is stands for “rack units”. 1U-spaces, which equal 1.75 inches. 42U. The reason this has become “standard” is because it is large enough to allow room for growth and small enough to access equipment easily. For rack enclosures, you might also encounter 42U and 42U racks. In the data center industry, you would consider this a standard “half-rack.”

Width measured by EIA-310 standard

19-inch Server Rack Width

The most common standard server rack width is 19 inches. Most rack-mounted equipment, especially servers, have a mounting width of 19 inches measured from one hole to another. Thus, the rack must be 19 inches across in order to fit this technology.
There are plenty of racks that have a 19 inch mounting width and 24 exterior width. This allows for space on the edge to manage cables, mount PDUs or monitoring equipment while optimizing floor space.

Server Rack Depth

Unlike height, server rack depth is commonly measured in inches and has is much less variation in sizes. Server racks can range from 19 to 50-inches in depth, but are commonly seen at 24 and 48-inch depths. A 24-inch rack would be perfect for housing network equipment, AV equipment, patch panels, etc.
A 29-inch depth, which is standard for open-frames, is compatible with many servers from Dell, HP, IBM, and Cisco. Any depth greater than that can either house larger equipment or provide extra space for cable management and other accessories.

Main Frame & Mounting Elements

Extruded vertical main frame provides the rack with good structural support and is neat and pleasing to the eye. Mounting Elements conform to various international standards so that all types of data and voice equipment can be easily mounted.

Front Glass Door with Swing Handle Lock

Front doors are available in many designs and ventilation options. Rack security accessory upgrade to a swing Handle lock. They come with a default Swing Handle Lock. The default door is the Glass door with Swing Handle Lock

Solid Steel Rear Door

A solid steel Rear door with cable entry slots. requirements for service entry allowing the enclosure to be placed closer to a wall. Back doors are available in many designs and ventilation options. They come with a solid steel for wall mount racks.

Top Frame c/w Cable Entry Access

Top Frame is fully slotted at its four edges to allow for proper ventilation preventing internal equipment from overheating.

Base Frame with Cable Entry Access

Base Frame allows for cable entry access and provides good stability support to the overall structure.

Wall Mount

Wall Mount Channel attach to the back of network cabinets to help hand/ mount the racks around in wall. Very Strong mount Steel to bear the loading safely.

Side Panels with quick release Clutch Lock

These allow you to have access to the side of the cabinet. The doors have Cam Lock on the top side for added security and two latches. When released, the panels can be removed.

PDU - Power Distribution Unit

Standard Power Distribution Unit simply provide evenly distributed electrical power to servers and rack accessories.

Fanplate with Fans

Metal Faceplate with 2 Fans to pull the hot air out of your server rack bringing in the cooler air from the bottom of the server rack. Fans is the best way to maintaining a safe operating temperature for valuable rack equipment. Fans attach to the top panel and assists with removing hot air from the server cabinet. A fan mounted on the top of your Server Rack will help to keep your servers at a cooler temperature.

M6 Cage Nuts & Screws

Quality Steel Cage Nuts & Screws for Server Cabinet. Enclosure includes mounting hardware of 40 pieces of M6 cage nuts and 40 pieces of M6 screws

Buy 42U Network /Server Rack Cabinet in Bangladesh

Germany Computer and Telecom Limited-GCTL offer Best Server rack in Bangladesh for any single need. We provide 42U 600×450mm Network Server Rack within all available accessories & technologies.

What is the Best Price of 42U Network /Server Rack Cabinet in Bangladesh?

The latest price of DATEUP MW.6409.9101, 42U 600×450mm Server Rack/Cabinet in Bangladesh is from Taka 7,800 BDT to 8,600 BDT per. You can buy the DATEUP 42U 600x450mm Server Rack/Cabinet at best price from our website or visit any of our showrooms.

Buy 42U Network /Server Rack Cabinet in Bangladesh

Germany Computer and Telecom Limited-GCTL offer Best Server rack in Bangladesh for any single need. We provide 42U 600×450mm Network Server Rack within all available accessories & technologies.